Hi,
I understand that SCCM can deploy updates to clients and that the windows updates on computers has nothing to download since nothing is approved via WSUS, but what does the SCCM client do when the computer is away from the domain ? I recall with System Centre Essentials 2010 that the client would switch to microsoft's windows update servers if the computer was away from the domain after ~6 hours. Is there a similar setting in the SCCM 2012 client ?
Thanks
Hi, Guys.
Can you help me how to leverage the reporting capability of SCCM 2012 via its reporting server under Monitoring? How can I make the report online and to make it look like a dashboard?
The report should show compliance on AV, Firewall, Patching, etc.
Thank you.
Hi, Guys.
Do you have manuals on how to use SCCM to deploy software updates to workstations and servers? Thank you
Hi,
I'm looking for a fix for SSL/TLS use of weak RC4 cipher Vulnerability fix. I found below Microsoft link for that.
https://support.microsoft.com/en-us/help/2868725/microsoft-security-advisory-update-for-disabling-rc4
I downloaded "For all supported x86-based versions of Windows 7"(Windows6.1-KB2868725-x64) fix, however when I'm trying to install the installer is saying the update is already installed and I didn't find any registry which are mentioned in the above link.
Can anyone help me over here.
Can't update and get this "Configuration Manager Client (5.00.8634.1000) - Fejl 0x80070643" and it's ask for start all over again. But the result are still the same. Tried to reinstall WIN, but same result after a looog waiting!
Peter
Hello All,
I want to create a registry key NoAutoUpdate with dword=1, through DCM settings SCCM 2012.
Can some one please help me with guide or blogs.
I created a powershell script when tested in the lab it is not creating any registry if i deploy it through DCM settings, but if i run the script manually it is creating.
Regards,
Swamy.
Hello All,
Would someone please confirm if 'Critical Updates' classification always has a Severity of 'None'
Seems so in my home lab test. Since I will be creating filters in Production, wanted to be sure.
Regards
One of our Windows 2008R2 server with SCCM client installed showed
WUAHandler.log
Its a WSUS Update Source type ({3CB4A8B0-0F04-4725-A8B0-413808E248E9}), adding it.WUAHandler20/08/2018 11:04:38 AM6076 (0x17BC)
Existing WUA Managed server was already set (https://xxxx.xxxx.xx:8531), skipping Group Policy registration.
Added Update Source ({3CB4A8B0-0F04-4725-A8B0-413808E248E9}) of content type: 2
CreateInstance failed for UpdateSession.
And UpdatesDeployment.log showed
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>'Can someone please help? Many thanks.
Hello,
Could someone please explain how to get SharePoint 2013 Farm Deployment patches to be visible for deployment in the "All Software Updates" node in SCCM? The SharePoint 2013 Farm Deployment patches show up in WSUS, but never shows up in SCCM. Only the non Farm Deployment patches show up. Any insight to this would be great.
Hello Team,
I am on SCCM 1710 , a CAS and 2 Primaries
My windows 10 systems are running v1607 (x64)
50% of my systems are showing Feature update 1709 NOT REQUIRED but the same are showing 1703 and 1803 as required. I have looked around and installed April CU , later i installed May CU for the same version but he status is same.
I also declined all Windows 10 1803 updates in WSUS ran a full sync , now all 1803 FUs are expired in my server . still 1709 are not showing as required on 50% of the computers.
Any suggestions please :)
Thanks \ Freddie
Hi Team,
This is a critical issue!
A new kind of malware is detected by System Center Endpoint Protection by AMSI detection mode.
The Name of the malware in SCEP is "Trojan:Win32/AmsiTamper.A!ams". I am unable to search the information about the malware in Microsoft Threat Encyclopedia.I want to know information about the malware.
The infection location is "amsi:_VBScriptc66e4fda021e4c98" in SCCM.
I want to know how to Navigate to path "amsi:_" and threat informations about "Trojan:Win32/AmsiTamper.A!ams"
Kindly help us ASAP
Hello,
I have a scenario where i need to fetch windows update details from a WSUS server onto a linux box. Is there any way to do that like any API, interface, module or script?
Thanks
Kiran
We have an isolated network and need to use UNC path updates process outlined here:
https://blogs.technet.microsoft.com/charlesa_us/2015/05/20/configmgr-2012-how-to-deploy-scep-definition-updates-via-unc-share-for-isolated-environment/
However, the updates for the x64 mcap-fe are not downloading and come back with an error. I have verified that all others are working fine. Here is the path that is listed both at that page and at the Microsoft page for manual downloads:
https://www.microsoft.com/en-us/wdsi/definitions
The target path that is not working is:
https://go.microsoft.com/fwlink/?LinkID=87341
Is there an updated path for this download or is it broken unintentionally?
Hi All,
can someone explain the meaning of the Orange Circle, Green Arrow, and X on the All Software Updates section in SCCM 2012?
Regards.
I have synchronized successfully the Dell catalog for business clients from the new SCCM 1806 feature.
I see there are firmware and BIOS updates available so i tried to create an Automatic Deployment rule for Dell updates
For example I see a Broadcom driver in the product classification: Drivers and Applications:
Now when I do a preview on the Automatic rule, no updates show up:
What am I missing?
I have an issue, I can not figure out..
Originally, I had SUP obtain windows updates directly from Microsoft. Things worked very well.
We purchased Retina CS to mitigate WIndows & 3rd Party updates.
So, for this to work, we had to point SUP to an existing Upstream WSUS Server.
The Architecture is as follows;
SCCM Server 2012 - 2012 server, has a Back-End SQL Server 2012 Server.
The SCCM Server SUP connects to the Upstream WSUS Server [2008 server R2], that has a Backend 2008 SQL Server
The SCCM Server 2012 is a Automonus,
WSYNCMGR Log:
Sometimes in the WSYNCMGR, I get succeeded; mostly I get Failed as show here..
Sync failed: The operation has timed out. Source: Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse $$<SMS_WSUS_SYNC_MANAGER><08-09-2013 06:17:09.689+300><thread=5944 (0x1738)>
Software Update Point Synchronization Status
Synchronization source: BR-WSUS
Synchronization: failed
Code: 0X80131509
Thank you for your help..
Hi, Guys.
Do you have any documentation to streamline the patch management?
Thank you
Hello,
I have been observing these warnings on couple of 2012 R2 & few 2016 servers when we scan for windows update against MS.
When you scan from wuapp.exe
2018-08-2508:19:52:547164097d8WSWARNING: Nws Failure: errorCode=0x803d0000
2018-08-2508:19:52:547164097d8WSWARNING: There was an error communicating with the endpoint at 'https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx'.
2018-08-2508:19:52:547164097d8WSWARNING: The server returned HTTP status code '413 (0x19D)' with text 'Request Entity Too Large'.
2018-08-2508:19:52:547164097d8WSWARNING: The response from the HTTP server was not recognized.
2018-08-2508:19:52:547164097d8WSWARNING: MapToSusHResult mapped Nws error 0x803d0000 to 0x80240439
2018-08-2508:19:52:547164097d8WSWARNING: Web service call failed with hr = 80240439.
2018-08-2508:19:52:547164097d8WSWARNING: Current service auth scheme='None'.
2018-08-2508:19:52:547164097d8WSWARNING: Proxy List used: '(null)', Bypass List used: '(null)', Last Proxy used: '(null)', Last auth Schemes used: 'None'.
2018-08-2508:19:52:547164097d8WSFATAL: OnCallFailure failed with hr=0X80240439
2018-08-2508:19:52:547164097d8SLSRetrieving SLS response from server using ETAG "Ww/uzEDtiHGuCQKdqqiVoucsE3BysNngQpDk+NfngSU=_1440"...
2018-08-2508:19:52:547164097d8SLSMaking request with URL HTTPS://sls.update.microsoft.com/SLS/{7971F918-A847-4430-9279-4A52D1EFE18D}/x64/6.3.9600.0/0?CH=604&L=en-US&P=&PT=0x7&WUA=7.9.9600.18970
2018-08-2508:19:52:563164097d8EPGot 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
2018-08-2508:19:52:563164097d8PTWARNING: PTError: 0x80240439
2018-08-2508:19:52:563164097d8PTWARNING: SyncUpdates_WithRecovery failed.: 0x80240439
2018-08-2508:19:52:563164097d8IdleTmrWU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 40) stopped; does use network; is at background priority
2018-08-2508:19:52:563164097d8PT + SyncUpdates round trips: 2
2018-08-2508:19:52:563164097d8PTWARNING: Sync of Drivers failed (Software succeeded): 0x80240439
When you scan using PS
MS wuapp API reference says that result code 3 means that it succeeded with error.
$updatesearcher.Search("IsInstalled=0 AND Type='Software'") | fl
ResultCode : 3
RootCategories : System.__ComObject
Updates : System.__ComObject
Warnings : System.__ComObject
Can anyone suggest on how to fix these warning ? Is this potentially missing any updates ?